Highlight development-ready lots across a suburb/postcode. Enter an area (or use this view), set filters, scan.
Sort
Indicative screen from the NSW cadastre + zoning + minimum-lot-size layers, using the same capability rules as the site report. Verify each lot's controls, easements, overlays & SEPP eligibility before acting.
Toggle on, then click the map to drop a ground RL (AHD, ~30 m DEM).
On-map arrow down the site's fall, labelled with the grade (from the ~30 m DEM). Indicative.
Current ≈ 1:— · accurate at 96 dpi / 100% zoom; exact on PDF export.
NSW overlays several survey vintages in places; this draws one at a time (finest by default) so contours don't cross. The list updates to whatever covers the spot you're viewing.
Which contours to draw within the selected survey. Labelled every 5th line; needs the Contours layer on (auto in Survey mode).
Rotates the live map and the exported PDF/report plan together (°). Shift-drag (or two-finger twist) also rotates; tap a boundary (table row or the edge on the map) to align to it. DXF stays true MGA2020.
Draws the buildable area = lot inset by that type's front/side/rear setbacks (ground = solid gold, upper floor = dashed where it differs). Indicative.
Click to trace a proposed footprint; double-click to close. Reports area, site coverage & whether it fits the envelope.
Splits the frontage into equal Torrens lots that meet the LEP min lot size & the min width (m) above. Indicative side-by-side layout — ignores battle-axe/handle & corner splays.
12:00 pm
Casts the building-envelope shadow (height = HOB) through the day — drag the slider to move the sun. Sweep shows the total area overshadowed between 9 am–3 pm, the standard solar-access window. Indicative screen, not a certified shadow diagram.
True-scale sheets with north point, scale bar & title block. Site plan is real; floor-plan & elevation are scaled templates (setback envelope + height limit) to sketch over. If content won't fit the chosen scale it steps to the next that does.
Move the map to check capture dates…
Saved sites appear here (stored in this browser).
Save exports all sites + settings as a shareable .json project file; Load merges one back in.
—
Planning information▾
Boundary dimensions▾
Select a lot…
Export the boundary & site data from the Export / Report button at the bottom of the screen.
Services & easements (DBYD)▾
Select a lot…
Survey control marks (SCIMS)▾
Select a lot…
Site levels & slope▾
Select a lot…
Sales & market▾
Select a lot…
Land value (Valuer General)▾
Select a lot…
Strata scheme (StrataHub)▾
Select a lot…
Development applications nearby▾
Select a lot…
Suburb demographics (ABS Census)▾
Select a lot…
Location & distances▾
Select a lot…
Catchment (drive / walk time) indicative▾
Select a lot…
Hazards & overlays▾
Select a lot…
Noise exposure indicative▾
Expand to check noise sources (roads, rail, airports)…
Development potential indicative▾
Subdivision scenarios indicative▾
Select a lot…
Feasibility (financials) indicative▾
Select a lot…
Uplift & precincts (LMR / TOD) indicative▾
Select a lot…
Solar & overshadowing (21 Jun) indicative▾
Select a lot…
School catchments▾
Select a lot…
Transport (public transport nearby)▾
Select a lot…
Mobile towers & connectivity▾
Select a lot…
Utilities & infrastructure (indicative)▾
Select a lot…
Yield & ADG amenity indicative▾
Select a lot…
Cut & fill (earthworks) indicative▾
Select a lot…
Driveway & access (AS 2890.1) indicative▾
Select a lot…
Statewide planning pathways indicative▾
Permitted land uses (LEP)▾
Select a lot…
Development standards (CDC + DCP)▾
Select a lot…
Open this spot in…▾
Indicative only — not a certified professional assessment.
Planning, feasibility, hazard, dimension, level and survey figures are computer estimates from public NSW datasets and may be
incomplete, out of date or wrong. Verify every figure with the relevant council, a registered surveyor, a certifier and/or a
planning professional before making any decision, offer or lodgement. No liability is accepted for reliance on this output.